|
Copyright 2006-2007 ™WaterWerks Motorsports—All rights reserved. |
|
The APR front mount intercooler is the best in the industry. With hundreds of hours of computer flow dynamics used in the design, this FMIC has the lowest pressure drop of any intercooler on the market. |
Product Summary |
|
FMIC Highlights: · APR Cast End Tanks with Internal Vaning · Top-Bottom Feed Extruded Aluminum Core · Mandrel-Bent, Powdercoated Stainless Steel Plumbing · APR Custom Silicone Intake Hoses · All Associated Bracketry and Hardware |
|
Pricing from: $999 |
|
We are pleased to offer the APR front mounted intercooler for 1.8T engines. The construction and advanced design techniques used in the APR intercooler sets it apart from all the others on the market. Utilizing such technologies as a top-bottom feed core, custom mandrel bent plumbing, and innovative cast endtanks with internal vaning, this intercooler has produced excellent results in testing. The conditions of one test that was performed is as follows: at 20 psi of pressure with a vehicle speed of 70 mph, and an elevation of approximately 500 feet above sea level. Under these conditions the internal flow was measured at 720cfm. Also at those conditions, with an input temp of 240º F, the intercooler was quite effective; cooling the output air to 126º F. While doing this, the intercooler measured a pressure drop of only .58 psi. Equally as impressive with the APR intercooler was the external pressure drop (the amount of air pressure behind the intercooler) of only 1.01 psi. This helps to allow airflow to other critical parts of the car such as the radiator and A/C condenser. While the internal pressure drop is important, the external pressure drop is often overlooked. Most other intercoolers commonly cause 1.5 to 2.0 pounds of pressure drop, hindering the radiator from effectively doing its job of cooling the engine. |
|
SKU/Item Number: WWMSFMIC |
|
APR Front Mount Intercooler |
|
***MK5 FMIC COMING SOON*** |
